When it comes time to getting an oil change, some people feel they don’t want the hassle or maybe they just don’t trust their own ability to do it. However, once you get the hang of it, performing your own oil change can be quite simple. The process actually requires very few tools and can save you some money in the meantime.
Below are some tips for how to do a DIY oil change. Of course, if you’d rather leave the maintenance to a professional mechanic, we’re here to help too! Simply call or stop by our Service Center.
Oil Change Supplies
To start things off, you’re going to need these simple tools and materials.
- Rags
- Rubber mallet
- Safety glasses
- Latex gloves
- Wrench set
- Oil filter wrench
- a funnel and oil pan.
- OIl and oil filter
Oil Change Steps
Normally on average, an oil change can take around 30 minutes. But on your first time out, it could take up to an hour.
- Before you head out to buy your oil at your local auto parts store, make sure to consult your owner’s manual to make sure you find the oil type and weight that is right for your vehicle.
- Place plastic sheeting on the ground to help with the cleaning process. This will help with spillage. Then drive your vehicle over the cover and jack it up. Then place the jack stands in position.
- Now that you have your car specific motor oil and filter and your vehicle is in place, it is time to start. Using your wrench and rubber mallet, unscrew the oil plug and move it out of the way from the oil stream. Now drain the old oil. This is when things get messy, so wear latex gloves.
- Tighten your drain plug
- Then remove your old oil filter and tighten on your new one. Have your pan positioned correctly to catch spillage and have rags handy, as you’re going to get some oil down your arm.
- Then with your funnel in place, insert the fresh oil. Add approximately one quart less than the recommended amount.
- Screw on oil cap and start the engine. Running the engine will circulate the new oil.
- After taking your car off the jacks, it is time to check your oil level. This will help you determine if you need to add more oil or not. You’ll know the level is full when the oil comes up to the upper hole or hash mark.
- Efficiently recycle your old oil. The auto part store you bought your new oil from will generally recycle it for you free of charge.
- That’s it!
